Often, while using the PS4 certain issues may arise which lead to the console entering safe mode. This is a very common troubleshooting method to fix any kind of problem in your PS4.
Using the safe mode comes with fixing your analog drifts or your console and controller acting up but it is necessary to know how to get your PS4 out of safe mode as well.
But again, the safe mode itself can be as problematic if your console keeps getting in the loop. This article will guide you through the entire process of how to get PS4 out of the safe mode.
- 1 Why Is the PS4 Stuck in a Safe Mode Loop?
- 2 How to Fix PS4 Stuck in Safe Mode Loop
- 3 Conclusion
- 4 Playstation 4 Safe Mode FAQs
Why Is the PS4 Stuck in a Safe Mode Loop?
To make the PS4 enter safe mode, simply press the power off button for a few seconds. When your console starts to blink a few times, expect it to turn off the next moment.
Then, press the power button for around 5-7 seconds until you hear two consecutive beeps (one after another) and your PS4 has entered the safe mode which will be displayed on the screen.
If you ever find your PlayStation 4 stuck in safe mode which you are unable to figure out how and a few reasons may have caused such trouble. A few of them are listed below for a good read:
- The operating system of PS4 may have been corrupted or there is a system failure.
- Issues in the PS4 cables as they might be damaged.
- Hard drive crashes which make the console OS not start or work properly.
- CMOS memory chip may be faulty or hold corrupted files.
- Motherboard not functioning properly or may be damaged.
- Electrical shortage to the console or major powering issues to the PS4.
If your PS4 enters safe mode without the power button, the above reasons might be a cause of it and can be fixable for as long as your console does not have any power-related issues.
If such an issue is identified, then it is highly recommended to get it fixed at a repair shop or the final call is to get a replacement.
How to Fix PS4 Stuck in Safe Mode Loop
The console in safe mode will display numerous options during the reboot process to fix any software problem. If the safe mode screen keeps looping over and over again, there might be some serious issues that need to be fixed quickly.
The following steps are described in an understandable term for you on how to get your PS4 out of the safe mode in no time.
1. Check the Cables
Faulty cables are one major cause due to which there might be an unending problem regarding the electrical pathways in your PS4.
The damage to the cables may lead to short circuits, electrocution, and a plausible cause of a fire breakout.
This can cause a serious outcome so it is highly important to check if the cables are functional and properly connected.
If there is a power flow issue that can affect the overall performance of your PS4 and may lead your console to loop in and out of safe mode.
Electrical spikes and the inadequate power supply may further damage your console and it may cause its shelf life to reduce.
This is something that should be avoided so it is recommended to keep a manual check on every cable linked to the PS4.
Make sure that the HDMI and USB ports are not defective and the cables are attached properly. If you find any damages to the cables, do replace them with new ones and restart your console to check if your PS4 is stuck in safe mode or not.
Lastly, recheck whether you have connected your console correctly.
2. Restart the PS4
Another option that can be carried out to get your PS4 stuck on safe mode out is to reboot your PlayStation 4. Simply, follow the steps given below to conduct a restart of your PS4:
- Connect your controller with your console.
- Select the “restart PS4” option from the list displayed on the screen.
- Wait for some time for your PS4 to restart.
If the problem persists and you see your console going back to the safe mode, it is recommended to try out the other methods mentioned in this article.
3. Rebuild PS4 Database
An option to get your PS4 out of safe mode without using the power button is to rebuild the PS4 database to ensure any sort of disruption is not present in the database.
This way, your PS4 will eject any malware that is harming your console and your PS4 may come out of the safe mode altogether.
Rebuilding your database also helps to rid your PS4 of any unwanted files and makes it run smoother. Follow the guide given below on how to rebuild your database:
- Connect your controller to the PS4.
- Hover over option 5 “Rebuild Database”
- Press X from your controller.
- Wait for your PS4 to rebuild the database.
4. Update System Software
If your PS4 has any corruption regarding the operating system, it is safe to say it needs a system update to fix any software malfunctions.
Updating system software may help with PS4 stuck in the safe mode, this can also ensure whether your OS is rigged with any problem or needs a replacement.
You can either update your software automatically or manually. Both the solutions are explained in this section:
- Updating your Software automatically:
This will ensure that your PS4 will automatically update any new Software that gets installed.
- Select “Settings” using your controller.
- Select the “Power Saving Setting” option.
- Select “Set features in Rest Mode”.
- Enable settings related to staying connected with the internet.
- Updating your Software manually:
If your PS4 fails to update the software automatically due to some enabling issue or some issues regarding the OS, you can do a software update manually by following the given steps:
- Select “Setting” using your controller.
- Select the system software option.
- Click on update now.
- Wait for the update to happen.
- Restart your PS4.
You can also update your system from the option available when your PS4 goes into Safe mode. This way any software issue can be resolved and your PS4 should come out of the safe mode without a hassle.
5. Initialize the PS4
This method will not only restore your PS4 to the default settings but again care should be taken as it will erase all the game data and other content stored in your software.
The data will still be stored in the USB drives you to use so you can install them back in. You can easily reinstall the software in your console to fix the safe mode issue.
You can carry out this method by reading through the steps mentioned:
- Create a file in your USB drive in your PC/MAC.
- Create another folder in the file named UPDATE.
- Go to the Update Software page in PS4 and select the reinstall software option.
- Save the software in your folder and download the installation from there.
6. Format the PS4 Hard Drive
If your PS4 is dealing with some kind of a hard drive issue, it is highly recommended to either format the entire drive or replace it with a new one.
Problems regarding the hard drive can be a reason why your PS4 is stuck in safe mode.
You can format your drive by following the given steps:
- Connect the PS4 hard drive to an external USB drive before connecting it to the computer via the USB connection.
- Go to the DRIVE option once you have ensured that your drive is connected to your PC/MAC.
- Click on START > DISK MANAGEMENT.
- Right-click the unknown marked hard drive.
- Select INITIALIZE.
- Select the memory partition.
- Click OK.
- Wait for the initialization process to finish.
- Connect your PS4 hard drive to the console and restart.
7. Clear the CMOS Memory
The CMOS memory card is a small chip present in your console to store the BIOS configuration of your PS4.
This CMOS controls the booting system of your console and it may be facing some complications due to which your PS4 is stuck in safe mode.
Since it is a complex method, it is recommended to get it done by a professional unless you want to follow the guide given below on your own:
- Disconnect your PS4 after turning it off.
- Open the case and locate the CMOS chip on the motherboard.
- Using a small screwdriver, gently remove the CMOS battery from the board and wait for some time.
- You can either replace the battery with a new one or insert the previous one after a couple of minutes.
- Join the case back and restart your PS4
8. Check the Power Supply & Sources
Sometimes a faulty connection to the powering socket can also lead to your PS4 being stuck in the safe mode.
You should give a good check whether your power supply has not been fluctuating or tripping which may provide insufficient electricity to your console due to which it is being forced into the safe mode loop.
9. Check The Connected Cables
Your PS4 may be hard stuck on the safe mode loop if there are problems regarding the connection between the connecting cables and your console.
To fix this, make sure all the wirings are properly attached and that there are no loose endings to your HDMI and USB cables to the portal.
If the problem persists, you may replace the cables with new ones and restart your PS4 to check if it is out of the safe mode or not.
10. Send your console for repairs
You can send your PS4 for a professional look so that they can identify any underlying cause of the problem if none of the above methods worked out for you.
If still, your PS4 remains in the safe mode, then the only solution left is to invest in a brand new console.
Such a software problem can be easily fixed by the methods discussed in this article and your console should be right back on track.
These simple tricks can help you on How to Get PS4 Out of Safe Mode but if the problem occurs again then your console does need a good hardware check or a new replacement for your old buddy.
Playstation 4 Safe Mode FAQs
I can’t get my PS4 to boot in Safe Mode. Is there anything else I can do?
If you face problems regarding rebooting in safe mode, you can check for your cable connectivity and power sources to work properly.
Further, you must make sure that your controller is connected to your console. You may also rebuild the database or give your PS4 a restart when in safe mode.
My controller won’t connect using Safe Mode. What’s the deal?
There might be some problem with your controller if it is unable to connect using safe mode. In such a case you can either give your controller a restart or try to manually connect it via a secondary controller.
How do I get my PS4 out of Safe Mode?
You can get your PS4 out of the safe mode by simply restarting your console, updating system software, checking for cable connectivity, or giving a rebuild to your database.